Fog-Based Treatment
Reach hidden cavities, reduce airborne spores, and treat surfaces without tearing out every wall.
What Goes Wrong
The gap between a fogging job that works and one that does not comes down to what happens before and after the fog is released.
Fogging without a moisture meter reading means the source feeding the mold is still active, and regrowth follows within weeks.
A moisture meter reading before fogging identifies wet zones so the source can be addressed before treatment begins.
Releasing fog into an open space lets displaced spores drift into unaffected rooms, spreading contamination rather than reducing it.
Containment barriers direct the fog through the target area while an air scrubber captures spores that become airborne during treatment.
Fogging saturated drywall or soaked insulation does not penetrate the material, mold inside those layers survives and continues to grow.
Saturated porous materials are physically removed first; fogging then treats the remaining surfaces and hard-to-reach cavities.
Dead spores and loosened debris that settle after fogging still affect air quality if the space is not HEPA vacuumed and wiped down.
After the EPA-registered product’s dwell time, HEPA vacuuming and damp wiping remove settled particulate before reoccupancy.
Scope of Work
Fogging is one part of a broader remediation process, here is what the work actually includes.
EPA-registered disinfectant fog treats exposed surfaces and reduces airborne spore counts across the treated area.
Fine fog particles travel into stud bays, HVAC vents, and baseboards that standard cleaning tools cannot reach.
Widespread surface contamination from storm or flood intrusion is addressed alongside physical removal of damaged materials.
Fogging reaches roof decking, floor joists, and other structural surfaces in confined spaces with limited physical access.
Moisture meter readings identify wet zones before treatment.
Barriers keep displaced spores out of unaffected areas.
Runs throughout treatment to capture airborne spores.
Post-fog cleanup removes settled debris and dead spores.
Why Choose Us
Fogging is only as effective as the process built around it, here is how our partners approach the work.
No work is scheduled until a technician has completed an on-site moisture inspection and written up the scope.
The written scope names the containment method, removal plan, and post-remediation clearance testing before work begins.
Partners cover flood-related and post-storm mold cases, including properties with widespread surface contamination.
Older wood-frame homes and properties with attic or crawl space access are within the standard scope of work.
Post-remediation clearance testing is part of the written scope, confirming the work met its stated objective.
The Process
01
A technician visits the property, takes moisture meter readings, and identifies affected materials before any scope is written.
02
Containment is set up, saturated porous materials are removed, then EPA-registered dry fog is released for the specified dwell time.
03
The space is ventilated, HEPA vacuumed, and wiped down, then clearance testing confirms the treatment met the written scope.
Pricing Estimates
| Job | Typical cost |
|---|---|
| Small room fog treatment | $300-$800 |
| Single-home fog treatment | $800-$2,500 |
| Whole-home fog treatment | $2,500-$6,000 |
Describe the mold or moisture problem and we’ll arrange an on-site inspection with a written scope before anything is booked.